... in which I reveal my army board, and give my first painting update. (WARNING*** LOTS**** of pictures)

 First, I'll let the pictures speak for themselves.

 Tombworld deployment. Above is my 1850 army I would like to run on June 4th.

Here's how I did it, start to finish:

I started with a piece of regular foam board. Now, I wanted to magnetize the board so the minis would be secure, but not glue a ton of magnets to the board. I wanted to be able to use the board for multiple versions of my Necron army, not just this incarnation. So, after a quick trip to the local hardware store, I picked up a piece of steel duct panel. Be careful, this stuff is sharp on the edges. Trust me, you only make the mistake of handling this stuff without gloves ONCE. It was only $4 for a 20"x30" sheet.

I tested the paint and the flock, to make sure the magnet would hold thru the multiple layers.

Pretty successful, don't you think? Worked like a charm.

After using rubber cement to glue the metal to the foam board, I masked off the edges of the panel so that the metal would not be exposed.
Afterwards, a quick coat of black primer.

Next, I began working on the mountain. While the mountain was drying, I would switch off to flocking the board. This step took forever... Not much work for a lot of results, but a lot of time waiting for glue to dry.

I started with some spare foam I had laying around. It is actually the foam that gets pulled out from army trays. I just used Elmer's glue, Popsicle sticks and some brass rods to hold the foam in place while it dried.

Next, I used some plaster cloth to cover the foam form. You can pick up plaster cloth at your local craft store. After about a half an hour, I was able to mix up some more plaster to fill in the gaps and flesh out the base. Here's where I had to switch gears because it had to dry over night.

Next, a layer of black primer.

I took my Dremmel and cut the Necron symbol into the rock face. Drybrush a layer of rust colored red, and then a heavy coat of black ink. Here's the result.

Back to the board. I cut up some of the leftover gauss rod sprues, and chopped up the pieces that didn't look like crystals. I glued the chopped up pieces on like patches of rocks, and made little outcroppings of the squarish rods like crystal formations. I also used some clear casting resin and some rock molds to cast the large green clear rocks.

Here's the first coat of flock. I used rust colored ballast to simulate the rocky "martian" like landscape. I glue things on in patches like this for a good reason. I use a mixture of 1/2 water and 1/2 elmer's glue to hold the flock. When I let a section dry, and then go back over the edge of it at a later time, it gives a second layer and a "windswept" appearance.







Now you can see the landscape coming together.

My son, Finn

As for all the mess of the flock, I employ slave labor to clean up my mess behind me.

Some glue under the mountain, some flock around the base, and some clear green rocks and some Necron rods on the mountain.

I decided to make a frame for the board. All I did was pick up moulding from the hardware store, cut it at 45 degree angles, glue, clamp and nail it together. If someone requests it, I'll go into more detail about the frame another time.

After painting the frame black, but before I gloss coated it, I decided to put some Necron glyph decals on around the boarder of the frame.

 

One complete army board.

Now for the painting update....

3 down! Yes, I am aware that is not quite the 21 I should have done by now, but finals are this week... priorities and all. I do however, have 14 with paint on them very close to completion, and 12 more built and primed today. I would have done more, but I ran out of primer.... again. So, 3 down, 203 to go, and a chuck of about 20 that will be done shortly.

Now I bid you all goodnight, it is after midnight, so please excuse my posting if it is erratic... I'll edit and clean it up later.. sleep now...

... in which I seriously have the best ideas!

I got hit with the creative billyclub hard this week. Now that all the pressure is off from school, I'm finding more time to relax and do hobby stuff.

Unfortunately, I'm also the most forgetful person in the world, I meant to upload some pics of my army board as a WIP, but I left the camera out in the car.  Basically, I finished off the third floor of Witchfate Tor, and put it on hold while I did an army board for my Necrons. It went relatively quick. I am putting the finishing touches on it as we speak. I'll post a big "how I did this" when it is completed. I really put forth a lot of effort and multiple techniques, from carving, sculpting, casting, painting, and even carpentry. (I made the frame for it myself) and I am really proud of the results.

I had 3 ideas floating around in my head today for custom minis and mods. First, since I now have experience with casting clear resin now, I want to do a couple of Gelatinous Cubes for my DnD game, cause I think it would be hilarious. Next, I had a great vision for a custom Necron Lord. Let's just say I am super anxious to get to that one. Finally, I had an idea for a completely over the top pimp daddy mod. I don't want to go into it too much before its finished. I seriously think it is so good that some of the trollers out there may steal the idea and beat me to the punch. I will keep my ideas to myself for now, but I WILL be finishing that up by the end of May... well maybe...

The caveat with all of this is that my unpainted minis are getting out of control. I made a promise to my wife (and to myself) not to buy any more minis until I have 50% of what I have painted. So, I have to paint roughly 150 minis before I get to my mods. Heh. Maybe I'll actually go thru and inventory what I have so I can track my progress over the blog. Maybe have a few "Iron Man" painting sessions with SeerK, Mr. O, and the DFG crew and record a podcast while we paint the night away.

Time to kick it into high gear!!! Yippee Kai-yay MF!!

... in which I continue Witchfate Tor, and ruminate more on army boards.

Thank god the end is in sight!! A few more details and then the third floor will be complete. That's on the slate for tomorrow morning before work. Here's some WIP photos, mostly to show off what I've done so far, and to complain a little bit more about the model.

The pieces so far...

Top of the tower, only base coated

The first two floors that are totally finished. Notice the gap between the pillar on the right and the tower. If I take it closer to the tower, then I can't get the second floor off and on.

Another angle

Opposite side

Last angle

Tower base

Another angle of the base. I included this so you could see the detail in the eye in the wall.

2nd Floor

3rd Floor - WIP

Tower, mostly assembled.

Men-at-Arms next to tower for size comparison

M-a-A on top of tower

If you look closely, you can see by the staircase where the wall just doesn't line up right. This is the piece I had to reshape.

It's definitely coming together, but it is taking a lot more effort than I expected.

So, I spent my "painting" time tonight cleaning up my hobby area rather than actually painting. I put away all the minis SeerK snagged for me from Adepticon and all the miscellany I've picked up. While I was doing this, I really got to thinking about doing an army board for OST's tourney in June. 

I'm kicking around the idea of magnetizing the board. I like the thought of the pieces being that much more stable. However, I think I decided against cutting out impressions in the board. This would mean that I could not modify the board easily if I changed or expanded that army.

I started experimenting with rare earth magnets for this. I have some sitting around that I use for making parts of minis interchangeable. They have a really strong pull, and stick to metal really well. The magnets I have are only 1/8", so not ideal for basing purposes, but enough for me to get a feel for how this is gonna work. I put the foam board up against the duct work in the basement to see if the magnet would be strong enough to pull all the way thru the board. Unfortunately, it wasn't. I'm not sure if it was because to the tiny size of the magnet, or because it wasn't close enough to the metal.  I'm gonna take a trip to the hardware store to see if I can find a piece of sheet metal. I'll also have to see about getting some larger magnets, and if they can pull thru the foam board. If they can't perhaps I can just paint and flock the metal. I can get some plaster cloth from the art supply store, and then I can craft a full piece of terrain.

I started considering what to do for a good Necron board. I think I'm gonna go look to see if I can find some green crystals, and cut up some left over rod sprues to make rock outcroppings. I'll cut some foam up for some larger crystals... maybe run some lights underneath the clear crystal parts so that they flicker and glow. I'm also contemplating about making holes in a hill for the Flayed ones to be clawing their way up out of.. Just thoughts right now, I don't want to start another project until I finish at least 3 of all the WIP pieces I have going.

Thoughts about army boards.

First, my frustrations with Witchfate Tor continue.  Painting is going slow, I ended up cutting a few brushes so I could actually reach in to do the detail work on floor #2. I ran into another issue with floor #1, There are 4 pillars that surround the tower, and extend up to floor #2. Thankfully, they did mention to only glue the pillars to the base, so you can take to floors apart.... Wonderful. Too bad that the pillars do NOT fit on the base, I had to add some green stuff to make them butt up against the wall, then secure them with a very loose glue joint, because there was no real area for the glue to hold...Once I got all of that worked out, I went to put on the second floor, and....Yup, the pillars are now too tight, and didn't fit around the tower... all because that one wall was warped and the base of the tower is not circular... OY.  I did get it resolved, but this is seriously turning out to be the most frustrating model I've ever built. One of the reasons for that is the thickness of the pieces. It is not like other models, where add a little heat and/or pressure and presto! The walls are seriously over 1/4" thick, and heavy duty.

Anyway, I should finish floor #2 up this weekend, and I'll try to post some pics. This is a real labor of love at this point. I am really putting a lot into this.


ONWARDS!

Last night, Old School Terminator, Vogrin and the Judge from DFG and I went out to dinner to celebrate SeerKarandras' birthday. Over dinner there was much booze and gaming talk. Good times. Anyhow, with all of the terrain I've been building lately, SeerK had asked me to assist with an army board sometime in the future before next year's adepticon. I must say I am totally on board for this. 

Army boards are a new concept for me, I only just recently found out about them from the tourney circuit. (Yeah, I know.... I'm a little behind the times) But, I have always enjoyed doing terrain and scenery, and doing something like an army board really appeals to me.

Just in case you don't know what I'm talking about, an army board is, well, a board decked out like a piece of terrain to show off your painted army. Here's a couple of images I stole off the web so you can see what I'm talking about.

I've seen some amazing boards, (Like Bob-Tan's) and I've seen some incredibly lame ones. (Sorry, SeerK, a flocked piece of styrofoam? Really? LOL!)

My brain instantly goes into how to build one of these.  Not bout the terrain, that's the easy part. I'm talking about the board.  What type of features do I want it to have? Do I want a frame around it? Should I cut out places for bases?

For my first attempt, I picked up two foam boards from the office supply store. What I think I am going to do is lay out my army on one board, and outline where the units will be. I'll cut those pieces out, so that when the model is placed in the hole, the top of the base will be flush with the board, looking more like an actual army, rather than a bunch of miniatures. Past that, glue both boards together, and prime it. I think the added stability of a frame would be great too.

Another idea I've been toying around with is magnetizing the army board. With the depressions already cut in, it would make it really easy to do, and also really stable and secure. The downside to this, not really conducive to army expansion... Where as if it was a flat board, you could always add to it. Hmmm.... I wonder if I get a thin sheet of metal that the rare earth magnets would be strong enough to adhere THRU the foamboard... and if not, could I paint and flock the metal??????? Hmmmmmmm.....

Just some ideas I'm tossing around now... feel free to chime in with any input or advice. :)

Now, back to Witchfate Tor.....