I am resolved now to hit that 50%, and to do it quickly. The first step in this challenge is to take inventory of what I have, and come up with a plan.
I'm just waiting for the glue to dry on the frame for the army board, then it will be 100%. I'll post on that probably later tonight or tomorrow.
Here's where I stand, all models included, even those partially done:
1 Witchfate Tor - top floor
1 Bretonnian Damsel on Horse
1 Hook Mountain Ogre
1 LotR Ent
52 Greatcoat Troopers
10 Vampire Counts Skeletons
1 Necron Destroyer
1 Araknarok Spider
3 Leman Russ Tanks
4 Discworld minis (nobby, Death w/guitar, Carrot, and Moist)
4 "Fighter" Knights
1 Pegasus Knight
31 Knights of the Realm
11 Archers
6 Battle Pilgrims
6 Grail Knights
2 Questing Knights
14 Men at Arms
21 Mouselings
1 Chaos Death Knight
4 Bretonnian Lords
1 Battle Standard Bearer
1 Succubus
3 Orcs
1 Warlord Crom
1 Storm Lord
1 Prince Altharin
1 Warlord Spinetail
1 Chupacabra
1 Zomie Hitler
1 Xanthos Mech
5 "Old" Knights of the Realm
1 Wolflord Marraig
3 Horsemen of the Apocalypse (War, Pestilence, and Famine)
2 Phoenix Hawks
1 Construction Mech
8 Scout Cars
2 Tanks
9 DnD Heroes
1 Wyvern
1 Rotpatch
1 Space Captain
1 Action Jackson
4 Trebuchet Crew
1 Mantis Assassin
1 High Elf Prince on Griffin
1 Elf Mage
10 Sea Guard
10 sword masters of Hoeth
5 Reavers
1 Skaven Warlord
1 Warlock Engineer
40 Clanrats
1 Master Moulder
2 Rat Ogres
1 Warfire Thrower
1 Poison Wind Mortar
12 Dwarf Warriors
10 THunderers
8 Miners
1 Thane
1 Dragonslayer
1 Cannon
3 Crew
40 Night Goblins
20 Archers Goblins
10 SPider riders
1 Big Boss
1 Shaman
1 Troll
*AND* 1 Custom Bretonnian Lord Mod
For a sickening total of:
wait for it.........
412!!!!
Sheesh. I see her point. That's a bit more than I expected. Let's see.... 1/2 of that would be 206.... and if I do that over 30 days, that's an average of 6.86666~ a day... Just to get to my mods.
Let the challenge begin! Painting will start at 5 pm, April 30th. I'll post regularly my progress.
Overall Wargaming and Miniature Blog.
Showing posts with label dungeons and dragons. Show all posts
Showing posts with label dungeons and dragons. Show all posts
Saturday, April 30, 2011
Wednesday, December 1, 2010
MWAHAHAHAHAHAHA!!!!!
Life is good.
A little package from merry old England was delivered to me on Monday. :) Pix to come. I'm totally jonesing to take it out and put the hurt on some Dark Eldar with my Necrons.
On to the topics of the day, a store review and a comment on D&D character builders.
Store Review
Pandemonium
Garden City, MI 48135
I didn't post their website because, well, it sucks... Other than telling the store hours and a gaming schedule it is worthless. Despite the drive (I live in Lansing, a good two hours away), whenever I visit my family in the Detroit area, I try to swing down to Pandemonium to see what they got. Don't expect too much in the way of customer service here, this place is all about the product.
The carry the full line of GW merch, not only 40K, but Fantasy and LOTR as well. They also stock the full line of Reaper Mini's, Hordes, Warmachine, and DnD. It's very very convenient place to find exactly what you want without special ordering it. The downside is that they run MSRP, and there is no club or incentive to buy more or from them.
Two things make Pandemonium stand out.
1: They carry Forge World in stock. Yep. No waiting on Int'l shipping... walk right in, grab what you want and go.
2: They have Used bins for 40K and Fantasy. The used models are usually a little less than 1/2 a new one, and the come with all the parts. You can paw thru the bins and inspect them and pick and choose what you want. I was able to pick up my King Louen (see previous blog to see him painted) AND a Grail Relaquae with 6 Battle Pilgrims for $40. (Louen by himself is $45). A little Pine-Sol and elbow greasy later.... You get the idea.
Overall, I give Pandemonium 3 out of 5 stars.
Customer Service frankly sucks, the place is nigh impossible to find coming from the north (it faces south along Middlebelt, so you don't even see it unless you are driving North), and it has no enticement to shop there.
To recap the pros: Full lines IN STOCK, Used GW, Forgeworld!!!, and gaming area aplenty!
Now a quick word on D&D character builders. For 4e, you just can't beat D&DI's Character builder. But if you are a 3.5 hold out like me, check out Heroforge! It is a free program, and it is a spreadsheet that runs in Excel. It has been spot on for all of my characters, and has even caught some errors (oops!) that I have made while advancing my characters. They do have a 4e platform available, but I have not tried it yet, Also, be sure to grab Spellforge while you are there too! Playing a magic user has never been so easy!
Well, that's it for now... Have fun storming the castle!
A little package from merry old England was delivered to me on Monday. :) Pix to come. I'm totally jonesing to take it out and put the hurt on some Dark Eldar with my Necrons.
On to the topics of the day, a store review and a comment on D&D character builders.
Store Review
Pandemonium
(734) 427-2451
1858 Middlebelt Rd Garden City, MI 48135
I didn't post their website because, well, it sucks... Other than telling the store hours and a gaming schedule it is worthless. Despite the drive (I live in Lansing, a good two hours away), whenever I visit my family in the Detroit area, I try to swing down to Pandemonium to see what they got. Don't expect too much in the way of customer service here, this place is all about the product.
The carry the full line of GW merch, not only 40K, but Fantasy and LOTR as well. They also stock the full line of Reaper Mini's, Hordes, Warmachine, and DnD. It's very very convenient place to find exactly what you want without special ordering it. The downside is that they run MSRP, and there is no club or incentive to buy more or from them.
Two things make Pandemonium stand out.
1: They carry Forge World in stock. Yep. No waiting on Int'l shipping... walk right in, grab what you want and go.
2: They have Used bins for 40K and Fantasy. The used models are usually a little less than 1/2 a new one, and the come with all the parts. You can paw thru the bins and inspect them and pick and choose what you want. I was able to pick up my King Louen (see previous blog to see him painted) AND a Grail Relaquae with 6 Battle Pilgrims for $40. (Louen by himself is $45). A little Pine-Sol and elbow greasy later.... You get the idea.
Overall, I give Pandemonium 3 out of 5 stars.
Customer Service frankly sucks, the place is nigh impossible to find coming from the north (it faces south along Middlebelt, so you don't even see it unless you are driving North), and it has no enticement to shop there.
To recap the pros: Full lines IN STOCK, Used GW, Forgeworld!!!, and gaming area aplenty!
Now a quick word on D&D character builders. For 4e, you just can't beat D&DI's Character builder. But if you are a 3.5 hold out like me, check out Heroforge! It is a free program, and it is a spreadsheet that runs in Excel. It has been spot on for all of my characters, and has even caught some errors (oops!) that I have made while advancing my characters. They do have a 4e platform available, but I have not tried it yet, Also, be sure to grab Spellforge while you are there too! Playing a magic user has never been so easy!
Well, that's it for now... Have fun storming the castle!
Sunday, November 7, 2010
Building a gaming table at home, and on the cheap!
If you're like me, the kitchen table does NOT work for gaming. (Mine is too small, and usually is covered with something sticky, courtesy of my two sons.) Well, I am here today to tell you that building your own gaming table is possible, and very affordable.
I not only play Warhammer and 40K, but I am also an avid fan of Dungeons and Dragons, Rogue Trader, and other RPGs. So, versatility of a table is a must. Let me show you what I did.
To conserve space, I not only made it a table, but I built storage into the bottom of it, a slide out drawer to add surface area, and put the table on casters so I can easily move the table around.
You can see the braces on the bottom of the table, and since I took these pictures, I have added a few boards across the bottom so I can store all of my terrain pieces safely.
Ok, so lets talk about the cost of all of this. The surface of the table was the most expensive part, and by surface I mean the grass gaming mat I purchased for $30. I decided to splurge on this, since I constructed the rest of the table for around the same amount. There are four other methods I have seen for creating a surface, but since I use this table for RPG's, tabletop gaming, miniature gaming, and a play
area for my kids, I wanted the grass to be removable, so that is why I went with the mat. When the guys come over for D&D, I just roll it up, and roll out the dry erase mat.
The other methods I've seen for creating a surface:
1. Flock the whole thing. Seems really expensive and labor intensive to me. The glue wouldn't always hold the flock in place, and could see patches getting worn in, and a general mess over time.
2. Spray paint. Good old inexpensive green spray paint. Durable, easy, but only will look as good as the wood you have underneath it.
3. Put sand on the table, spray paint it, then seal it.
Solves the wood look issue, but messy and labor intensive.
4. Textured paint. Probably the best of the these options. It is more expensive, but it is more likely to stay in place and be durable. The big drawback in my opinion, is that it creates a rough surface, and can scrape up your miniatures. As for the cost of the paint, it's can be offset by going to Michaels, Joanne's, or Hobby Lobby and using a 40% off coupon. Those places are great for gaming supplies.
Ok, back to the building cost of my table.
The surface area of the table was made from a 8' x 6' piece of OSB, cut down to 6' x 4'. ($15) OSB is great because it is heavy duty and CHEAP. Plywood ranges around $45, and solid wood, forget it. It's being covered anyway. Next, the frame of the table was constructed from 3 1" x 4" x 8' s and 4 1" x 4" x 6' s. ($1.89 and $1.59 each, respectively) I cut the 8' boards in half to go along the 4' side of the table surface.
The legs are made from 2 2" x 6" x 6' construction studs. ($3.89 each). They don't look pretty, but they are completely solid. You can cut these to your height preference, mine are at 28", same as a regular table, and are augmented by the casters I added on the bottom of the legs. (Casters were $3.98 for all 4).
For the drawer, I used the scrap 2' from the OSB board and just bought a drawer slider set with a high weight rating. ($4.99)
For the actual construction, anyone can do it. Don't be intimidated, can you draw a straight line? Use a measuring tape? Those are the hardest parts. Cutting the wood is simple, just use a circular saw and DO NOT try to cut it by hand. Invest in the tool, it's only $30 if you don't already have one, or you could just borrow one too. This whole project only took about 2 hours for me.
I started by cutting all the lumber to length. Then I assembled the 4' ends of the table. Square up the legs (ie: make sure the distance at the top is the same as the bottom. Place one of the 4' boards across the top. I have mine extend 3/4" over the top to hold the OSB surface in place and appear flush. Screw into place. Screw a second board about 6" from the bottom for a support. Repeat whole process for other side. Once your legs are built, you just line up the 6' boards and attach them. Put your last 4' boards in the center for braces and you have your frame. Flip it upside down and attach the casters. Turn it back over and set your tabletop in place. Mount the drawer slides, install the drawer and you are done! It really is that simple!
Let's recap the cost:
OSB 6' x 8' 14.99
3 8' 1"x4" 5.69
4 6' 1"x4" 6.36
2 6' 2"x6" 7.78
Casters 3.98
Drawer slide 4.99
-----------------------------
TOTAL 43.79
Add your preferred finish to the table top, and GAME ON!
I not only play Warhammer and 40K, but I am also an avid fan of Dungeons and Dragons, Rogue Trader, and other RPGs. So, versatility of a table is a must. Let me show you what I did.
To conserve space, I not only made it a table, but I built storage into the bottom of it, a slide out drawer to add surface area, and put the table on casters so I can easily move the table around.
Ok, so lets talk about the cost of all of this. The surface of the table was the most expensive part, and by surface I mean the grass gaming mat I purchased for $30. I decided to splurge on this, since I constructed the rest of the table for around the same amount. There are four other methods I have seen for creating a surface, but since I use this table for RPG's, tabletop gaming, miniature gaming, and a play
The other methods I've seen for creating a surface:
1. Flock the whole thing. Seems really expensive and labor intensive to me. The glue wouldn't always hold the flock in place, and could see patches getting worn in, and a general mess over time.
2. Spray paint. Good old inexpensive green spray paint. Durable, easy, but only will look as good as the wood you have underneath it.
3. Put sand on the table, spray paint it, then seal it.
 |
| Drawer open |
4. Textured paint. Probably the best of the these options. It is more expensive, but it is more likely to stay in place and be durable. The big drawback in my opinion, is that it creates a rough surface, and can scrape up your miniatures. As for the cost of the paint, it's can be offset by going to Michaels, Joanne's, or Hobby Lobby and using a 40% off coupon. Those places are great for gaming supplies.
 |
| Drawer closed |
Ok, back to the building cost of my table.
The surface area of the table was made from a 8' x 6' piece of OSB, cut down to 6' x 4'. ($15) OSB is great because it is heavy duty and CHEAP. Plywood ranges around $45, and solid wood, forget it. It's being covered anyway. Next, the frame of the table was constructed from 3 1" x 4" x 8' s and 4 1" x 4" x 6' s. ($1.89 and $1.59 each, respectively) I cut the 8' boards in half to go along the 4' side of the table surface.
The legs are made from 2 2" x 6" x 6' construction studs. ($3.89 each). They don't look pretty, but they are completely solid. You can cut these to your height preference, mine are at 28", same as a regular table, and are augmented by the casters I added on the bottom of the legs. (Casters were $3.98 for all 4).
For the drawer, I used the scrap 2' from the OSB board and just bought a drawer slider set with a high weight rating. ($4.99)
For the actual construction, anyone can do it. Don't be intimidated, can you draw a straight line? Use a measuring tape? Those are the hardest parts. Cutting the wood is simple, just use a circular saw and DO NOT try to cut it by hand. Invest in the tool, it's only $30 if you don't already have one, or you could just borrow one too. This whole project only took about 2 hours for me.
I started by cutting all the lumber to length. Then I assembled the 4' ends of the table. Square up the legs (ie: make sure the distance at the top is the same as the bottom. Place one of the 4' boards across the top. I have mine extend 3/4" over the top to hold the OSB surface in place and appear flush. Screw into place. Screw a second board about 6" from the bottom for a support. Repeat whole process for other side. Once your legs are built, you just line up the 6' boards and attach them. Put your last 4' boards in the center for braces and you have your frame. Flip it upside down and attach the casters. Turn it back over and set your tabletop in place. Mount the drawer slides, install the drawer and you are done! It really is that simple!
Let's recap the cost:
OSB 6' x 8' 14.99
3 8' 1"x4" 5.69
4 6' 1"x4" 6.36
2 6' 2"x6" 7.78
Casters 3.98
Drawer slide 4.99
-----------------------------
TOTAL 43.79
Add your preferred finish to the table top, and GAME ON!
Saturday, October 2, 2010
Cry havok....
So, originally, we intended to do a joint blog with craftworldlansing.blogspot.com, however, due to technical difficulties, I decided to start my own blog, and just link to craftworldlansing.
I do play 40K as well, I have the startings of quite the Necron horde. Fantasy battle is where my interest lies though. Not necessarily just Warhammer, but Dungeons & Dragons, Dark Heaven, Hordes, etc. spark my imagination far more than 40K.
So far, for Warhammer Fantasy battle, I have a rather large host of Bretonnians, in different stages of construct. I have even modded out a couple of Bretonnian Lords (pictures to follow). I also have an starter army of High Elves, Skaven, Dwarves, and Goblins.
I have yet to play a game of Warhammer under the new 8th edition rules, as my spare time is largely devoted to painting and assembling my Bretonnian army. Seerkarandras keeps promising to come over and get a game in, but we usually just end up drinking beer and watching Family Guy. We'll get there. I just need to make an effort to get out to the local hobby shop (Shout out to Evolution Games!) and throw down the gauntlet.
This blog will be about everything fantasy and sci-fi related, so don't limit your view. I love to make customs and scenery, and often don't adhere to the status quo. Keep an open mind and step fully into the Kingdoms of Chaos.
I do play 40K as well, I have the startings of quite the Necron horde. Fantasy battle is where my interest lies though. Not necessarily just Warhammer, but Dungeons & Dragons, Dark Heaven, Hordes, etc. spark my imagination far more than 40K.
So far, for Warhammer Fantasy battle, I have a rather large host of Bretonnians, in different stages of construct. I have even modded out a couple of Bretonnian Lords (pictures to follow). I also have an starter army of High Elves, Skaven, Dwarves, and Goblins.
I have yet to play a game of Warhammer under the new 8th edition rules, as my spare time is largely devoted to painting and assembling my Bretonnian army. Seerkarandras keeps promising to come over and get a game in, but we usually just end up drinking beer and watching Family Guy. We'll get there. I just need to make an effort to get out to the local hobby shop (Shout out to Evolution Games!) and throw down the gauntlet.
This blog will be about everything fantasy and sci-fi related, so don't limit your view. I love to make customs and scenery, and often don't adhere to the status quo. Keep an open mind and step fully into the Kingdoms of Chaos.
Subscribe to:
Posts (Atom)